It’s no secret that many vapers are quite inveterate smokers who have quit their addiction and switched to the light side of vapor. But at the same time for many vapers vaping process should resemble smoking puff should be tight, so manufacturers with enviable regularity release tanks with tight MTL-puff. All known company Hellvape during its history released only one tank with MTL tightening MD RTA. Deciding to correct this unfortunate misunderstanding, the developers of the company have worked well and presented a new tank Hellvape Vertex MTL RTA, which is already attracts attention even in the box. This is a full-fledged MTL tank that uses not only the traditional tight draw, but also provides the ability to choose nozzles (where recently such a chip was used “hellip;if not at Vandy Vape), although the tank is interesting and practical.
General Info
Hellvape Vertex MTL RTA atomizer medium size, designed for installation of one coil, with the original performed system blowing, adjustable rotary ring and different nozzles, and designed for a tight cigarette puff. The new tank looks very strict and laconic, but it attracts attention because it fits to any device, especially since it is made in diameter of 22 mm. australian vape shop canberra The tank is designed for installation of one spiral, directly under which there is a ring with three options of blowing. Atomizer is designed for a tight cigarette draw, regulated by turning the ring at the base. You can buy Hellvape Vertex MTL RTA in four colors black, steel, gun metal and black and gold.
Kit
Looking at the package, you want to take a hat off to the developers for such a rich kit – it is rare that any manufacturer can boast of it. In the box the vaper waits:
Vertex MTL RTA atomizer with pre-installed 2 ml glass;
Extra 3.5 ml glass;
Additional increased height of the dome;
Five 0.6 “Omega spirals; A1 Prebuilt Coil;
Five spirals 1,0 “Omega; A1 Prebuilt Coil;
Wrench for turning nozzles;
Screwdriver;
Cotton;
Replacement O-rings;
Replacement screws;
User’s Manual.
Appearance and design
Vapers have been arguing for years about which tanks are better than MTL or DTL. Everyone defends his point of view, giving arguments in favor of this or that tank, but in any case, everyone is right in his own way. Hellvape company for a long time focused its attention on tanks and drips with free hookah inhalation, but now it was their turn to release MTL-tank – Vertex MTL RTA.
The appearance of Hellvape Vertex MTL RTA is austere and laconic, there are no frills and additional decor all business. The only decoration can be considered the name of the tank, which is printed on the dome. The tank is small, with a diameter of 22 mm, so it can confidently be called a cigarette and used in compact stealth bundles.
The Hellvape Vertex MTL RTA uses a 510-type drip tip that screws into a pad that fits into the top cap. This pad strongly resembles the 510-type adapter, and by taking it out you can install 810th drip-tip (though it is not clear why).
In Vertex MTL RTA Hellvape designers decided not to use bubble-glass so as not to spoil the tank diameter. The atomizer is equipped with an increased height of the dome and extended glass (there is a clear analogy with the Berserker first version), thanks to which the tank volume increases to 3.5 ml, and this technical solution does not affect the flavor transfer.
Case, airflow and usage features
Like all MTL tanks, the Hellvape Vertex MTL RTA features a single coil. The two posts are offset to the edge of the base so you can mount the coil horizontally and lock it in place with two slotted screws screwed on top. Everything is simple and straightforward. There are big enough holes in the deck for absorbent cotton, so you won’t have any problems with the wool.
Separate attention should be paid to the rotary disk with three types of holes, which is installed directly under the coil.
The vaper decides which blowing option suits him best: one small hole, three small or one wide hole. In order to turn the disk, there is no need to remove the coil. In the kit, there is a special key, but you can do it with a screwdriver.
No less interesting in Hellvape Vertex MTL RTA can be considered the air intake holes located in the base of the tank. At the disposal of the vaper are five holes with a diameter of 0.8/1.0/1.2/1.4/1.6 mm and one wide 5.8*1.7 mm, closing and opening which you can get not only a tight MTL draw, but also quite free DTL. Decide which of the options will be most convenient for the vaper only after experimentation.
There will be no difficulties with refilling – it is enough to turn the top cap by half-turn, after that the vaper gets access to two big enough refilling holes.
Conclusions and impressions
Even though the Hellvape Vertex MTL RTA has a certain analogy with the Vandy Vape atomizers, the device is interesting, practical and easy to use. Buying Hellvape Vertex MTL RTA, the vaper will get a lot of positive moments related to the variability of blowing, easy maintenance and versatility of the tank.
Advantages and disadvantages
Advantages
Non-standard threaded drip tip;
When opening the lid the holes are located immediately on the surface, so there is a high probability of spilling some liquid.
Advantages
Strict design;
Rich Kit;
Seat 22 mm;
The possibility of increasing the volume of the tank;
Easy installation of the coil and wool packing;
Disk with different nozzles;
Variable blowing, allowing you to choose the best type of puff;
Good flavor transfer.