As unfortunate as it may be to say, the era of powerful box mods, sabot tanks and drip sticks is coming to an end. Such devices and bundles are confidently replaced by more progressive devices – sub-mods, the feature of which is that they have sufficient power reserve, are designed for the use of interchangeable vaporizers with low resistance and have a good autonomy. One of the leaders in this area is considered to be Voopoo, which released two series of vaping mods, Drag and Vinci, that are in great demand among vapers. The Vinci line has already become legendary, but this does not mean that the company’s developers have stopped making it better, and a striking example of this is the new Voopoo Vinci 3 Mod Pod Kit, in which a number of errors and shortcomings inherent in the first two versions have been corrected.
General information
Voopoo Vinci 3 Mod Pod Kit is a compact sub-mod with a powerful battery, running on Gene.Al chipset and designed for installation of PnP series vaporizers. The device is made in a rather traditional design – a rectangle with rounded corners and edges, which crowns the cartridge with a flattened ergonomic drip-tip. The device features autonomy due to the 1800 mAh battery. Thanks to the Gene.Al chipset, the vaper will get up to 50 watts of power and standard varivatt mode. An important feature of the sub-mod is that it not only provides blowing control, but it is also designed for installation of popular vaporizers of PnP series. You can buy Voopoo Vinci Pod Kit in quite bright and original colors, and most of them are gradient.
Packing
Voopoo Company packs devices of this format almost always in the same way, and the new sub-mod is no exception, and after the purchase the user will not have to think about consumables for a while. In the box you can find:
– Vinci 3 Mod Pod Device battery pack;
– Vinci 3 Cartridge;
– 0.3ohm PnP-TW30 vaporizer;
– 0.6ohm PnP-DW60 vaporizer;
– USB Type-C cable;
– User’s Manual.
Vinci 3 Mod Pod Device Battery Pack
It is difficult to find a vaper who would not have heard of the Chinese company Voopoo, which is currently considered one of the undisputed leaders of the vape market. The company has become known not only for its Drag box mod, but also for the sub-mods released after it, which are in deserved demand among users. But Drag was not the only one that made the manufacturer famous. The Vinci series, the devices of which became one of the first sub-mods, can also be considered an important merit of Voopoo. The company’s developers have significantly expanded this lineup, offering vapers not only submods, but also POD systems. Having decided to return to the creation of sub-mods again, the company presented the Voopoo Vinci 3 Mod Pod Kit – the third generation of the famous device, the development of which took into account the shortcomings and deficiencies of previous versions.
The design of the sub-mod differs slightly from the previously released devices, as it is more flattened, but still the device has the traditional shape of a small rectangle with beveled corners and edges. The case is made of zinc alloy with plastic inserts, giving it originality. The device pleasantly surprises with its compact size – 101,3*30,5*21,6 mm, so it will not take up much space in your purse or pull away your pocket.
The Voopoo Vinci 3 Mod Pod Kit is powered by a built-in 1800 mAh battery, which is a serious claim to autonomy for such a compact device. The battery is charged using the USB Type-C connector, located on the side of the device.
It is quite logical that the Voopoo Vinci 3 Mod Pod Kit works under the control of Gene chipset, and it has GENE.AI 1.3 version, thanks to which the vaper gets the maximum power of 50 Watts and support for vaporizers with resistance from 0.15 Ohm. The device is activated by puffing and with a small round “Fire” button located in the center, and the same button changes the power of the device (when you hold it, it increases). The device is equipped with a small monochrome display, which displays a minimal set of information about the device operation – battery level, power, number of puffs and vaporizer resistance.
Vinci 3 Cartridge
A cartridge with a flattened, ergonomic mouthpiece was developed especially for the Voopoo Vinci 3 Mod Pod Kit that is practical and easy to use and maintain. The cartridge is held in the battery pack by magnets.
A very nice moment for many users will be the fact that Voopoo Vinci 3 Mod Pod Kit is designed to install the most common vaporizers of PnP series. In the kit the manufacturer offers two new mesh vaporizers – 0.3ohm PnP-TW30 and 0.6ohm PnP-DW60, designed for different vaping styles.
The sub-mod provides the ability to adjust the blowing. To change the draw under the cartridge has a wheel, rotating which you can set the best for the vaper draw, ranging from the closest to MTL, ending with a free hookah.
In order to refill the cartridge, you need to remove the mouthpiece and pour 4 ml of liquid into the hole equipped with a check valve.
Conclusions and impressions
It is safe to say that the developers of Voopoo when creating the Vinci 3 Mod Pod Kit took into account the comments and complaints of users regarding the charging and blowing control, so the device turned out to be as practical as possible. The vaper who decides to buy Voopoo Vinci 3 Mod Pod Kit will get an easy to use and maintain submod that will pleasantly surprise with its autonomy and versatility.
Advantages and disadvantages
Advantages
– Compact size;
– Efficient battery;
– Fast charging;
– High-performance chipset;
– Supports resistance from 0.15 Ohm;
– PnP vaporizers;
– Adjustable air blow;
– Easy refilling.
Disadvantages
– When using more than 45 watts of power with 0.15 ohm vaporizers, the device heats up a bit;
– Not very convenient power control.