Kangertech is one of the few companies that has entered the niche of bottomfiders (squonks). The first version of their Dripbox was quite successful and popular. Therefore, they decided to continue to move forward with the development of the Bottomfeeder and I am happy to introduce you to the updated Dripbox 160W.
I think you understand that the boxmod has the shape of RX200 and it is a very good decision, because I can’t see a better shape for a boxmod for 3 18650 batteries. Except that the boxmod is designed for two 18650 batteries, instead of the third one there is a system of liquid supply to the atomizer. The boxmod is available in black, white and silver colors. australian vape shop melbourne The controls are arranged almost the same way as on the RX200, only the + – buttons are vertically instead of horizontally. Overall, I’m very happy with the design, even though the boxmod reminds us of someone 🙂
Until now, bottomfeeders were used by those who did not chase power, they were just interested in comfortable vaporization on a drip. But Kanger has broken this stereotype, as their boxmod is capable of much. The maximum power of the box mod is 160 W, the minimum resistance of the atomizer is 0.1 ohm, in thermocontrol mode 0.05 ohm with a temperature limit of 200-600 F or 100-315.5 C.
The boxmod is powered by two 18650 batteries, access to which is located under the latch cover at the bottom of the case. Thus, the autonomy of the boxmod, as well as power, has increased significantly.
As an atomizer the same drip tip is used as in the first version of Dripbox. Let me remind you that its peculiarity was the possibility of using interchangeable vaporizers. Their choice is still not great: 0.2 ohm on kantal and ceramic on 0.25 ohm. But it is quite possible that their assortment will be expanded.
The capacity of the tank (bottle) is 7 ml, which is quite a decent indicator, I would have enough liquid for a day and a half. Filling the bottle is intuitive, and you just need to press the bottle to get the liquid into the dripbox.
The connector is one of the most important parts of a box mod and atomizer. But it’s not that bad. You can use other drip tips, but they must necessarily be suitable for squonks, for this they must have a special center contact, through the hole of which the liquid and enters the atomizer. There are a very small number of them, but I will present you some of them:
Cthulu Hastur and Hastur V2
Tobeco Torque
Hobo Customs Hobo 3.1
Ohman Pancake
Narmods NarDA
NoName NoPity
Origen V3 Dripper by Norbert
Mark Bugs Chalice III
In my opinion the boxmod will become much more popular than the first version by increasing the power of the boxmod. These kinds of new products make me crazy happy, especially if they break stereotypes and don’t look like most of the products out there. The price for an all-in-one device, which lacks only batteries, is about 50 dollars, so the novelty can be called more than affordable.