The recent popularity of pod-mods is due to the fact that the vaper receives a compact and autonomous device that can please with good taste and even in bulk (evaporators on a mesh with a resistance of 0.2-0.3 Ohm are plenty for many models). But, as it turns out, not all vapers like small sub-mods, as they want to get more universal options that can be used not only with complete cartridges, but also with traditional atomizers with a 510 connector. There are many examples of such devices. Smoant recently released the Knight 80, which can be used as a standard box mod. Deciding not to stop there, the company’s developers decided to make a good upgrade to one of the sensational and popular Smoant Pasito devices, and the second version of the device was released – Smoant Pasito 2 kit. The new sub-mod turned out to be very interesting and worthy, and it’s safe to say that vapers will decide to buy the Smoant Pasito 2 kit, since it will be a universal option that can please many users.
General information
Smoant Pasito 2 kit is a medium-sized sub-mod, equipped with a fairly powerful built-in battery, has good functionality and is designed for the use of replaceable evaporators, RBA base and atomizers with a 510 connector. The design of the new device resembles its predecessor, a rectangle with stylish faux leather inserts. The device is equipped with a good board that can not only work in five modes, but also allows you to get power up to 80 Watts. The removable large-volume cartridge is designed to work with evaporators for Pasito and Knight 80, and, if necessary, can be replaced with an adapter for standard atomizers with a 510 connector. You can buy Smoant Pasito 2 kit in four colors: black, chocolate, black with diamond cut and blue.
Equipment
Once again, I would like to note that when offering a serviceable base or an adapter for the 510 connector for devices, manufacturers do not put them in the box, insisting on an additional purchase. The rest of the device is equipped quite standardly and decently:
Pasito 2 Mod;
6 ml cartridge with pre-installed K-1 0.30 Mesh vaporizer;
Evaporator K-3 Half-DTL 0.60 Mesh Coil;
USB Type-C cable;
User’s Guide;
Warranty card;
Certificate.
Battery pack Pasito 2 Mod
About a year and a half ago, Smoant released the Pasito sub-mod, which became truly revolutionary and innovative, as it provided the vaper with good customization options and the ability to install an RBA base. It is quite natural that the company’s marketers and developers could not help but be inspired by such success and proposed a successor to this line, Smoant Pasito 2 kit.
The design of the Smoant Pasito 2 kit is very similar to the first version, but the new device is quite large (117*38*27 mm), and looks more like a full-fledged box mod rather than a sub-mod, but this is due to an enlarged battery and other functional features. The body is made of zinc alloy with side panels of strict colors made of eco-leather.
The maximum power of 80 Watts in Smoant Pasito 2 kit is provided by a built-in battery with a decent capacity of 2500 mAh, and this is a good indicator for a pod-mod. The battery is charged with a current of 2A using the USB Type-C connector located on the bottom end of the device, and the full charging time will be about one and a half hours.
An important feature of Smoant Pasito 2 kit is that the device is equipped with a fairly functional chipset that allows you to select one of four modes VW, DVW, Bypass, TC (NI200, SS, TI). Thanks to this functionality, the pod-mod can be confidently compared to a good box mod. The device is equipped with a small color display, the color scheme of which you can choose depending on your preferences and even your mood. On the display you can find all the information a vaper needs: mode, power, battery charge level, resistance, voltage, number and time of puffs.
Pasito 2 Pod Cartridge
According to established tradition, Smoant Pasito 2 kit uses a cartridge that is held in the battery pack using magnets. An important feature is that the cartridge volume is 6 ml, which is quite a lot. The drip tip is 510, so it won’t be difficult to replace it.
The manufacturer has provided for replacing the cartridge with a special adapter for installing standard atomizers with a 510 connector, thanks to which Smoant Pasito 2 kit turns into a full-fledged small box mod, designed for installing tanks and drips with a diameter of up to 26 mm.
The cartridge in this device is quite interesting, since it can use two evaporators Pasito and Knight 80, and each type uses its own base. It is worth noting that the use of two types of serviced bases is also provided.
The advantage of such a cartridge is that it is not only non-spillable, but also has the ability to adjust the airflow, implemented using a small slider on the top end. By moving it, you can achieve the required tightening.
In order to fill the reservoir with 6 ml of liquid, you need to remove the cartridge from the battery pack and open the small silicone plug on its side surface. Moreover, in order to fill the maximum amount of liquid, it is necessary to position it horizontally.
Conclusions and impressions
We can quite confidently say that Smoant Pasito 2 kit will become a bestseller, successfully replacing the first version of the device, since, despite certain comments, the device turned out to be interesting, functional and practical. Due to its versatility and fairly powerful battery, the vaper will receive both a pod-mod and a box-mod, which has good autonomy and a lot of operating modes.
Advantages and disadvantages
Disadvantages
Quite large overall dimensions;
To refill, you must remove the cartridge from the battery pack;
To refill completely, the cartridge must be held horizontally.
Advantages
Convenient form factor;
Strict design;
Capacious battery;
Fast charging;
USB Type-C;
Functionality;
Possibility of installing an adapter for 510 atomizers;
Support for Pasito and Knight 80 series evaporators and supported bases;
Large cartridge volume;
510 drip tip;
Airflow adjustment.