A couple of years ago vapers were happy with simple enough drips with bottom blowing and inexpensive tanks with tight cigarette puffs, but now many of them are satiated with standard atomizers. Therefore it is not surprising that manufacturers try to release something original and extraordinary, and also tasty of course, this refers to atomizers. Vandy Vape which became one of the market leaders with enviable regularity offers its fans new devices which become more and more interesting and non-standard with every new model. The new Vandy Vape Mato RDTA is not just any drip top (or bacodripka you can call it whatever you want, the meaning does not change), but an original development that is sure to interest many vapers. The peculiarity of this device is its design, which, though not an absolute novelty, but has not yet been widely used.
General information
Vandy Vape Mato RDTA atomizer, designed for installation of one spiral, with a reservoir located under it, which contains steel cables to supply liquid to the flake. The design of the new drip top is quite original and somewhat crude, but giving it a special chic. The developers of the company decided to make an original and somewhat non-standard system of liquid supply using four steel cables lowered into the tank of polysulfone. The atomizer is single-helix, with side adjustable coil blowing, so the vaper is guaranteed to get a good taste and bulk. You can buy Vandy Vape Mato RDTA in five colors matte black, dark gray, steel, gold and gun metal.
Kit
Almost all vapers know that the company Vandy Vape its atomizers kits very decent and the new Bakodripka was no exception in a black box with a transparent window vaper will find everything he needs for its comfortable use:
Mato RDTA Atomizer;
Four steel cables;
Pre-wound Triple Fused Clapton coil (Ni80 0.23 Ohm);
Two hexes;
Coil Trimmer for coil stems;
Adapter for 510-type drippings;
Squonk pin;
Replacement screws;
Spare earings (a lot);
Spare silicone plugs for fueling hole;
Quality certificate;
User’s Manual.
Appearance and Design
There is an interesting trend in Vandy Vape products lately – they are not notable for miniature size (just remember Pyro 3 RDTA or Widowmaker RTA). We can not say that this is bad, because these atomizers are designed for use on quite powerful box-mods and do not pretend to the title of stealth. But given the design features slightly increased (height 44,6 mm) dimensions are unlikely to frighten vapers, especially since the planting diameter is quite standard 24 mm.
Designers from Vandy Vape seemed to have worked on the Mato RDTA design, but somehow not very sincerely, as the atomizer turned out a bit angular and strange – there is no highlight in it, which will attract attention. Although on the other hand the developers decided to focus the attention on the filling. The device is equipped with the original 810th dope-type without dong, made of colored acrylic, which you can easily replace with any other one from your collection.
One of the coolest features of the Vanadium Vape Mato RDTA is not the standard glass, but the tank made of polysulfone (thermoplastic polymer), which is almost impossible to break. Additional protection of the tank is a metal frame, which gives the tank some brutality. The volume of the tank is 5 ml, which is not too small for a single-coil atomizer.
Base, blowing and usage features
Naturally, the main point of the Vandy Vape Mato RDTA is the presence of four steel cables that go down into the liquid tank. We can’t say that this idea is new and innovative, as not so long ago VapeFly released its cigaretnikBrunhilde, which also uses a similar system. But in any case, there are not many similar designs on the market, so Vandy Vape Mato RDTA is somewhat of a pioneer. There are four holes in the base for installing the cables, into which they simply drop, with their tips peeking out slightly into the base.
The Vandy Vape Mato RDTA is a single coil atomizer with a pivotless deck for vertical coil installation with two horizontal hex screws. Coil installation is very simple and straightforward with Coil Trimmer (even marked with optimum length of coil legs), legs are cut, coil is inserted into holes in the deck and fixed.
You should pay special attention to the wool packing, because due to the peculiarities of the design there is no need to pack a lot of wool. Laying is very simple leave the tails of the absorbent cotton should be exactly enough to reach the ends of the cables.
The blowing in Vandy Vape Mato RDTA is realized quite interestingly, it is lateral, and the air comes through numerous holes, blowing the maximum area of the coil. The blowing is regulated by turning the dome.
To fill the tank you need to remove the dome, open the small silicone cap on the base and pour 5 ml of liquid. It is interesting that the manufacturer additionally equipped the atomizer with a squonk pin for use on the corresponding devices.
Conclusions and impressions
We can confidently say that Vandy Vape Mato RDTA is quite an innovative ” ” ” ” ” ” atomizer, capable of surprising even vapers with experience. Devices with such a design are rare, so vapers will at least be interested in using such an atomizer, and at the same time get a good taste and bulk, as you can safely set fat coils and experiment with blowing.
Advantages and disadvantages
Disadvantages
To refill you have to remove the dome and take out the silicone plug;
Difficult to guess the length of the cotton tips so as to avoid starvation.
Advantages
Original design;
Signature 810th drip-tip;
Large volume tank;
Squonk pin;
The tank is difficult to break;
Innovative liquid delivery system with cables;
Convenient and easy installation of the coil;
Excellent flavor and bulk.