This form of vaping devices, such as pod-mods, has not only become one of the most popular over the past couple of years, but has also changed significantly. If the first models of pod-mods provided the ability to replace the evaporator and adjust the power, then the new ones already have many functions, replaceable batteries, and the ability to use a serviced base. It’s unlikely that anyone will argue that one of the best-selling and most sought-after sub-mods is GeekVape Aegis Boost, which is liked by many vapers. But progress does not stand still, so this device has been improved, and the GeekVape Aegis Boost Pro Pod Kit has become a much more interesting, functional and practical pod-mod.

General information

GeekVape Aegis Boost Pro Pod Kit is a medium-sized pod-mod powered by an 18650 battery, designed to use replaceable evaporators, a serviceable cartridge or an adapter with a 510 connector. The design of the new sub-mod is similar to previous versions, but with minor cosmetic changes, although it is still immediately clear that this is Aegis Boost. australian vape The device has IP67 protection, so it is not afraid of moisture, dust, or shock. Depending on the vaper’s preferences, you can use replaceable P-series coils, an RDTA cartridge, or an adapter for using atomizers with a 510 connector. You can buy the GeekVape Aegis Boost Pro Pod Kit in six colors: black, gun metal, silver, blue, rainbow or red.

Equipment

Once again the question arises: why manufacturers who offer to complete their devices with a serviceable base and 510 adapters do not include them in the box. But in general, the equipment of the new sub-mod is quite decent:

Aegis Boost Pro Battery Pack;

Aegis Boost Pro Pod Cartridge;

Evaporator P Series Coil 2ohm, 60-70W (pre-installed);

Evaporator P Series Coil 0.4ohm, 50-60W;

Device for quickly removing the evaporator;

USB Type-C cable;

Spare drip tip;

User’s guide.

Aegis Boost Pro Battery Pack

As soon as GeekVape released the first box mod of the Aegis series, it immediately became a bestseller, so it was only logical that the line would be constantly expanded. And one of the representatives of this line, Aegis Boost, is rightfully considered one of the most popular among vapers, although there are many complaints and comments from users about it, which have been successfully corrected in the GeekVape Aegis Boost Pro Pod Kit.

The GeekVape Aegis Boost Pro Pod Kit looks similar to previous versions, although it has become a little larger and heavier, this is due to the use of a replaceable battery and improved protection. Its dimensions are 113.04*50.15*28.6 mm. The case is ergonomic, made of plastic, silicone, eco-leather and zinc alloy. Naturally, the new device also has dust, moisture and shock protection of IP67 class (but you still shouldn’t hit it with a hammer).

The maximum power of 100 Watts is provided by one 18650 battery, which is installed from below under a screw cap (it ensures tightness). If necessary, you can charge the battery with a current of 2A using the USB Type-C connector located on the side panel and closed with a silicone plug.

The GeekVape Aegis Boost Pro Pod Kit is controlled by an updated proprietary AS Chipset chipset, thanks to which you can use coils/evaporators with a resistance of 0.1 Ohm. Aegis Boost Pro has become more functional, since now the user has access to not only variable watts, but also TC (NI200, SS, TI), TCR, VPC, BYPASS, and this is good news. The device is equipped with a small color display on which you can find a standard set of information about the operation of the device: battery charge level, power, operating mode, coil resistance, current, voltage and number of puffs.

Aegis Boost Pro Pod cartridge

An important feature of the Aegis Boost Pro Pod cartridge is that instead of it you can install an adapter for using traditional atomizers with a 510 connector (the device turns into a classic single-can box mod) or an RDTA cartridge, thanks to which you can get a full-fledged serviceable base for one coil . The cartridge/adapter is held in the battery pack according to a familiar pattern using a latch on the side of the device.

The Aegis Boost Pro Pod cartridge is designed to use P Series Coil evaporators, and the kit already includes two 0.2 and 0.4 Ohm, so there will be no problems with taste and bulk.

The airflow adjustment is implemented using a small rotary ring on the side surface of the cartridge, making it easy for the vaper to set the optimal puff for him, ranging from a fairly tight cigarette puff to a loose hookah puff.

In order to refill the cartridge, you just need to open the small silicone plug on the top end of the device and fill in 6 ml of liquid.

Conclusions and impressions

The new GeekVape Aegis Boost Pro Pod Kit can easily be called a bug fix, since the developers took into account all the comments and complaints of vapers using Aegis Boost and Aegis Boost Plus. Every vaper who decides to buy the GeekVape Aegis Boost Pro Pod Kit will receive a universal device that will delight you with its functionality, practicality and ease of use.

Advantages and disadvantages

Flaws

The 510 adapter and RDTA cartridge must be purchased separately;

Quite large overall dimensions, comparable to a single-can box mod.

Advantages

Ergonomic design;

Using a 18650 battery;

IP67 protection;

Fast charging;

Productive and reliable chipset;

Good functionality;

Large cartridge volume;

Two drip tips included;

Convenient refueling;

Adjustable airflow.