Nowadays, it’s hard to find a vaper who doesn’t have a sub-mod in his arsenal. There are so many devices of this format that even a vaper with experience can’t always find the best option for him. In the assortment of each manufacturer there are at least two or three models of sub-mods that are in demand among vapers. But there is a manufacturer, every device of this format, which always causes delight among vapers is Voopoo. After the release of Vinci series, the company regularly began to release sub-mods of Drag series, which immediately became hits. The company decided not to stop at what has been achieved and presented a new Voopoo DRAG S PRO POD kit.
General Information
Voopoo DRAG S PRO POD kit” is a medium sized sub mod with a powerful built-in battery, running GENE.Fan 3.0 chip and a new cartridge. The new sub-mod is very similar to the previous version, as all lines of this series are fully retained. Thanks to the new GENE.Fan 3.0 chipset, the device has become even more stable and correct, and its functionality has increased slightly. A powerful battery will allow you to get a good autonomy. The device is equipped with a new cartridge, which uses TPP and PnP vaporizers, and the new design is more practical and convenient to use. Voopoo DRAG S PRO POD kit” is available in seven colors mystic red, classic black, basalt grey, California orange, garda blue, sapphire blue and sahara brown.
Bundling
We can’t say that Voopoo company surprised with the package of the new device, as everything is banal, usual and standard, but it’s not bad, because in the box the vaper is waiting:
DRAG S PRO Device battery pack;
TPP X Pod cartridge (5.5ml);
Vaporizer TPP-DM1,0.15ohm;
Vaporizer TPP-DM4, 0.3ohm;
USB Type-C cable;
User Manual.
DRAG S PRO Device Battery Pack
When Voopoo released the Drag box mod back in the day, it really revolutionized the world of vaping as it was called the DNA killer. After the Drag 2 came out, many vapers gave up on other manufacturers and became Voopoo fans. But when Voopoo DRAG S sub-mod saw the light of day, vapers immediately started to expect something more interesting, and this interesting thing became DRAG S PRO POD kit.
The Voopoo DRAG S PRO POD kit is designed in the corporate style, with one side of the device being semi-circular, covered with eco-leather, and the other side being straight, with the control panel and display located on it. The device is medium-sized 125.5*34.5*28.8 mm, so it will fit in your pocket without much difficulty. It is worth noting that the manufacturer immediately offers seven color solutions with very abstruse names, so the vaper has a lot to choose from.
The maximum power of the Voopoo DRAG S PRO POD kit is 80 watts, and it is provided by the built-in battery (the main difference between S and X) with a capacity of 3000 mAh, which is a very good indicator, because not every vaper uses removable batteries of such capacity. The battery is charged using the USB Type-C connector on the front panel with a current of 2.5A.
An important feature of the Voopoo DRAG S PRO Device is that it has a new GENE.Fan 3.0 chip, which is more stable and productive. Given that it is still a shortened version of the chipset, the functionality is also slightly different from that of box mods, so vapers will have three modes at their disposal smart (automatic wattage detection), RBA (manual wattage setting) and TC (thermal control). The minimum resistance supported by the chipset is 0.1 ohms. Activation of the device can be done with the Fire button and by puffing.
The device is equipped with a 0.96-inch color display, on which you can find quite a lot of information about the device’s operation battery level, mode, power, coil resistance, voltage, number and time of puffs.
An interesting solution, which has already been used by GeekVape, is the presence of a slider that allows you to lock the buttons so you can prevent accidental pressing of the keys in your pocket while carrying it.
TPP X Pod cartridge
The new device is equipped with a new TPP X Pod cartridge, which is similar to the previously released PnP Pod, but much more interesting and practical. The cartridge is equipped with a standard 810-m drip tip, which can be replaced with any other one if desired.
As it is clear from the name, the TPP X Pod cartridge is designed for TPP series vaporizers, but (here we can say a huge thank you to the developers) you can also use the usual vaporizers of PnP series. And there are two vaporizers in the kit – TPP-DM1,0.15ohm and TPP-DM4, 0.3ohm.
The “Voopoo DRAG S PRO POD kit” has a blowing adjustment, for which you just need to scroll the cartridge in the battery box, and for convenience on the top of the tank there is a colmrho with notches.
Special attention should be paid to the fact that one of the biggest problems of sub-tanks is corrected – it is refilled from the top, not from the bottom. To refill it is necessary to open the cap in the upper part of the cartridge and pour 5.5 ml of liquid.
Conclusions and impressions
Not so long ago Voopoo released Voopoo Drag X Plus Professional, which can be called a fiasco to some extent. But with the Voopoo DRAG S PRO POD kit” everything worked out well, the device turned out to be really interesting and practical, with quite original technical solutions and with corrected errors of previous versions.
Advantages and disadvantages
Disadvantages
Uncomfortable location of the lock key.
Advantages
Recognizable design;
Large number of colors;
Capable battery;
Fast charging;
High-performance chipset;
Advanced functionality;
Key lock;
Ability to use TPP and PnP vaporizers;
Adjustable blowing;
810th drip tip;
Convenient refilling;
Large cartridge capacity.