The number of vapers who prefer a tight cigarette puff, moving away from the free hookah draw, is constantly growing. This is regularly taken advantage of by manufacturers, offering vapers more and more new devices designed for tight puffing and the use of spirals with high resistance. On the vape market there are quite a lot of tanks, drip pots, rdtas and ready-made kits with cigarette puff, but that doesn’t mean that the manufacturing companies stop. Geekvape recently introduced a new starter kit – Geek Vape Flint AIO MTL Kit, powered by a built-in battery and equipped with an atomizer on interchangeable vaporizers. This kit is interesting for its compact size, easy maintenance and autonomy, so it will take its proper place in the range of MTL devices.
General Information
Geek Vape Flint AIO MTL Kit is a compact starter kit consisting of a Flint Mod battery pack with a built-in 950 mAh battery and a Flint Tank atomizer that runs on NS series replaceable vaporizers. The kit is originally designed for tight cigarette puffing, so you can’t use it to get big clouds. australian vape shop brisbane Kit can be attributed to the pipe mods with built-in battery, designed for the use of certain atomizers, and complete. Geek Vape Company offers the kit in four colors blue, gray, black and rainbow, so there will be no special problems with the choice.
Equipment
Geek Vape Flint AIO MTL Kit is not particularly different from similar devices of the company, and other manufacturers, too, but at the same time, the box has everything so that the vaper can immediately use the kit without additional time and financial costs. The box contains:
Flint Mod 950 mAh battery pack;
Flint Tank MTL atomizer with pre-installed 1.6 ohm NS series vaporizer;
Spare 1.6 ohm NS series vaporizer;
Spare glass;
Oring kit;
USB cable for charging;
User’s Manual.
Flint Mod Battery Pack
In order to maximally simplify the process of operation and maintenance of the starter kit, the manufacturer offers in it a battery pack with a built-in accumulator. Someone may say that such a solution is not a novelty (there are quite a lot of such devices from other manufacturers) and the battery capacity is very small. But the capacity of 950 mAh in this device is quite enough for autonomous work for one or two days, as it is designed for use with vaporizers resistance of 1.6 Ohm, respectively, the operating power is a minimum of 7-8 watts.
Special attention should be paid to the overall dimensions of the kit in the assembled state with the atomizer and standard drip tip is no more than 9.5 cm, so there will be no problems with its carrying, it will fit perfectly into any pocket. The diameter of the battery pack is 22 mm and it is equipped with a classic 510 connector, if desired, it can be used with MTL devices from other manufacturers. There is only one Fire button on the block, and it is large enough and has a grooved surface to make it easy for the user to find and press.
In order to understand the level of battery charge, not far from the fire button there is an LED, which changes its color depending on what percentage of charge is left. It glows green at 70-100% charge, blue at 31-69%, and red at less than 30%.
The battery pack is equipped with a standard set of protections, and is also able to work in three modes of operation (set automatically), in which the voltage per coil is 3.2, 3.5 and 3.8 volts. The minimum resistance with which Flint Mod can work is 0.5 ohms, so do not try to install sabom coils on it, they will not work.
Flint Tank MTL Atomizer
In most cases MTL tanks or drip tanks are equipped with racks for self-installation of the coil, but the company Geek Vape went a little different way, it has developed an atomizer Flint Tank, working on interchangeable vaporizers. As of today only one variant of NS vaporizer is available, with resistance of 1.6 ohms. If you believe the manufacturer, it uses a special purified cotton, which allows for maximum flavor transfer.
Blowing in Flint Tank is realized by the traditional bottom method, with air intake through five holes of different diameter. This solution in combination with specially designed vaporizers allows you to get a full cigarette puff, which many vapers try to achieve.
The Quick slide fill system allows you to do it quickly and accurately. The drip tip used in the atomizer is a traditional pawn510-format, which is very easy to replace with a drip tip that will be to the vaper’s liking.
Conclusions and impressions
Geek Vape Flint AIO MTL Kit is a starter kit that will definitely appeal to many fans of tight cigarette puffs. It is worth saying that the kit, having compact dimensions, has quite a good flavor transfer due to the use of special vaporizers. It is worth saying that the device can be used not only liquids on the usual nicotine, but also variants on salt, and this is an additional plus in the piggy bank of this device.
Advantages and disadvantages
Disadvantages
Low battery capacity;
Only one available vaporizer resistance.
Advantages
Compact size;
Innovative solution regarding the use of vaporizers;
Full-bodied, tight cigarette puff;
Excellent flavor transfer;
Easy maintenance and operation.