Despite the fact that quite often you can hear the phrase Vaping is no longer Vaping is dead, manufacturers have not only not reduced the number of devices produced, but also increased it, offering vapers a variety of devices. Now it is both difficult and difficult for a vaper to choose a device, as the range of devices presented is very large, and there is simply a lot to choose from. But there are devices that for quite a long time remain hits. To such devices you can safely include Aegis Boost from GeekVape, which has already been updated many times. Deciding not to stop, the manufacturer presented Geekvape Aegis Boost Pro Max 21700 Pod Mod Kit, which according to the new tradition of the company has a shorter name Geekvape B100 Pod Mod Kit.
General Information
Geekvape B100 (Aegis Boost Pro Max) 21700 Pod Mod Kit is a medium sized pod mod designed for a single 21700/18650 battery, running a proprietary chipset and designed to use P series vaporizers. In the design of the new device clearly guesses the belonging of the device to one of the most legendary lines of the company Geekvape Aegis, as it is made with a characteristic insert of eco-leather and has excellent ergonomics. The device is made in a case with IP67 protection. The cartridge is large enough volume, designed to install vaporizers of P series, but it can be replaced by RDTA or 510 connector. Buy Geekvape B100 21700 Pod Mod Kit can be purchased in six colors gunmetal, silver, black, rainbow, red and blue.
Equipment
The device is packed very decently, and the vaper will be able to find in the box everything that is necessary for trouble-free use of the device:
B100 Battery pack;
B100 Pod Cartridge;
Vaporizer Extractor;
Spare drip tip;
P Series Coil 0.2 ohm vaporizer (pre-installed);
P Series Coil 0.4 Ohm Vaporizer;
Adapter for 18650 batteries;
USB Type-C cable;
Warranty card;
User’s Manual.
B100 Battery pack
After sub-mods started appearing on the vape market, many manufacturers started releasing such devices one after another, and in most cases such devices were almost a copy of each other. Except for one Geekvape Aegis Boost, which can even be called somewhat cult, as for many vapers this device is exemplary in terms of flavor transfer, as well as practicality and functionality. But Aegis Boost in its original version has already become outdated, so it is quite logical that the company presented its updated version Geekvape B100 21700 Pod Mod Kit.
Geekvape designers did not radically change the appearance of the Geekvape B100 21700 Pod Mod Kit (or Aegis Boost Pro Max, if we focus on the names of the old format), so it is immediately clear that this is a worthy successor of the Aegis series, as in it you can find a semicircular insert made of eco-leather, and ergonomic body, and a characteristic recognizable button. The device can hardly be called miniature 121.9*49.17*33 mm, but such dimensions are very simply explained by the 21700 battery used in it. The case is made of zinc alloy, plastic, silicone inserts and eco-leather.
Considering that the Geekvape B100 21700 Pod Mod Kit is a continuation of the legendary Aegis series, the case of the device has standard IP67 class protection.
The maximum power of the Geekvape B100 21700 Pod Mod Kit is 100 watts, which is provided by a replaceable 21700/20700/18650 battery (using an adapter), which is installed from below under the screw-in cap. If the need arises, the battery can be charged using the USB Type-C connector, located on the side and covered with a silicone plug, with a current of 2A.
The sub-mod works under the control of a proprietary chip, thanks to which the vaper will be able to use the device in the mode of varivatta and thermocontrol, and the minimum resistance supported by the chip is 0.1 Ohm, and the maximum voltage supplied to the coil is 8.5 volts. The device is equipped with a 0.96-inch color display, which shows a standard set of information about the device operation.
B100 Pod Cartridge
For Geekvape B100 21700 Pod Mod Kit, a special cartridge was developed, held in the battery pack with the help of a latch. But the manufacturer has provided the possibility of installing not only a complete cartridge for P-series vaporizers, but also an RDTA cartridge, Boost Plus Pod cartridge and 510 adapter for the use of traditional tanks with the appropriate connector.
The Boost Pro Pod cartridge is designed to fit P-series vaporizers, and the kit comes with two variants with 0.2 and 0.4 ohm resistance, both on a grid, so there will be no problems with flavor and bulk for the vaper.
The cartridge has a blowing adjustment, realized in the traditional way for Boost series with the help of a small rotary ring with notches.
In order to refill the cartridge, you need to open the silicone plug on the top of the surface and pour 6 ml of liquid.
Conclusions and impression
Geekvape B100 (Aegis Boost Pro Max) 21700 Pod Mod Kit is a very interesting and practical device that will surely appeal to vapers, and it is characterized by versatility, so with some additional investment it can replace a full-fledged box mod. Buying Geekvape B100 (Aegis Boost Pro Max) 21700 Pod Mod Kit, a vaper will get a medium-sized device that is characterized by ease of use and maintenance.
Advantages and disadvantages
Disadvantages
RDTA cartridge and 510 connector must be purchased separately;
Fire button is too low.
Advantages
Recognizable design;
Good ergonomics;
Two battery sizes;
Fast charging;
Performance chip;
Easy operation;
Large cartridge capacity;
P-Series vaporizers;
Adjustable airflow;
Easy refilling.