Review of GeekVape AP2 POD kit

Vape manufacturers are constantly trying to surprise vapers with their developments, and some of them can be called passing – users just read the description and do not pay attention to them. But many devices are really able to interest vapers with their technical parameters, functionality, practicality and autonomy. It is to such devices can be safely attributed devices produced by one of the mastodontovveip market Geek Vape. Deciding to strengthen itself in the segment of sub-mods, the company decided to release a slightly modified and supplemented Aegis Pod, but with a new name GeekVape AP2 POD kit. Although the device can be attributed to a fairly simple series, but it will surely become the main device for daily use for many vapers.

General Information

GeekVape AP2 POD kit is a compact sub-mod, equipped with a built-in battery of medium capacity, with the ability to change the power and designed to install replaceable vaporizers G series. The device will immediately please with its compact size, light weight and good ergonomics, but at the same time it is made in a rather strict style, it is discreet, neat and with clear even lines. Despite its simplicity, the device has the ability to change the power between 10-18 watts. The sub-mod is designed to install replaceable vaporizers series G Coil resistance 0.6-1.2 Ohm. Buy GeekVape AP2 POD kit can be purchased in eight colors black, red, red camo, rainbow, blue, blue camo, green camo and gray camo.

Bundling

This sub-mod is completed quite standard, but not to the minimum, which can not fail to please, so in the box the vaper will be able to find:

Aegis Pod 2 (AP2) Device battery pack;

Aegis Pod 2 Cartridge (4.5ml);

G6ohm Coil (pre-installed);

G8ohm Coil;

Vaporizer Extractor;

USB Type-C cable;

User’s  Manual.

Aegis Pod 2 (AP2) Device Battery Pack

The fact that Geek Vape devices always attract the attention of vapers is an undeniable fact. And if we take into account that this manufacturer is noticeably activated, then each new device almost always becomes a hit in sales, as the developers of the company do not get their money for nothing. The company became famous thanks to its Aegis series devices, and not only unbreakable box mods, but also sub-mods, which are successfully used by many vapers. One of such devices is Aegis Pod, which the company decided to improve taking into account modern trends and market trends, so the light saw GeekVape AP2 POD kit, with a short name, but actually has the name Aegis Pod 2.

If you compare the GeekVape AP2 POD kit with other devices of the Aegis series, it is quite different from them visually, as the characteristic eco-leather inserts and overlays are not used. But at the same time the device looks very decent and stylish, neat smooth lines and good ergonomics. The device is small 90*35*17.5 mm.

Taking into account the fact that GeekVape AP2 POD kit still belongs to the Aegis series, it has IP67 protection against moisture, dust and shock, but you should not check it by drowning in a bucket of water or hitting it with a hammer.

The sub-mod is powered by a built-in battery with a capacity of 900 mAh, which is not bad enough for a device of this format, as you can get autonomous work for two or three days.

The battery is charged using a moisture-proof USB Type-C connector located on the bottom end of the device.

GeekVape AP2 POD kit is a fairly simple sub-mod, but the manufacturer has provided the ability to change the power of the device within 10-18 watts, with three modes of operation low, medium and high at the vaper’s disposal. Device control activation, power change and battery charge level control is done with the help of a single, rather large fire button.

Aegis Pod 2 Cartridge

Especially for GeekVape AP2 POD kit, a practical cartridge has been designed to accommodate interchangeable vaporizers. The cartridge is held in the battery pack by strong magnets.

Geek Vape’s developers should be commended for using previously released vaporizer series in their devices rather than making new ones. AP2 POD kit is designed to use vaporizers series G Series Coil, which are currently presented four types of resistance 0,6/0,8/1,0/1,2 Ohm, so there is a lot to choose from.

In this device there is a possibility to adjust the puff DL or MTL. To do this, you need to remove the cartridge, unroll it and put it back in place.

To refill the cartridge, you need to remove it from the battery pack, open the silicone plug on the side surface and pour in 4.5 ml of liquid.

Conclusions and impressions

We can confidently say that in GeekVape AP2 POD kit developers have corrected the errors and flaws that were in the first version. The device will please with its practicality, good autonomy and compactness, as well as a large selection of vaporizers for vaping liquids on both salt and freebase nicotine.

Advantages and disadvantages

Disadvantages

You have to remove the cartridge from the battery pack to refill;

Puff adjustment is very simple.

Advantages

Compact size;

Stylish design;

Capable battery;

Fast charging;

Three power modes;

G-series vaporizers;

Adjustable airflow;

Large cartridge capacity.